We all have clothes in our closet we no longer wear, here are some tips on restyling and updating a boring denim jacket!
Re-Style Your Boring Denim Jacket
I have had this denim jacket in my closet for a few years. Most of the time, I rarely wear it. The jacket is too short in the sleeves and body for me, and too small around the middle. I bought this denim jacket on a whim when I was at a blog conference and I needed a jacket while sitting in a cool room listening to the conference speakers. If I had thought about it longer, I wouldn’t have bought it in the first place because it didn’t really fit. Sometimes you do funny things when you are cold!
I didn’t want to give the jacket away since it is practically new, and I decided the best thing to do would be to restyle it so it suits me better. I added wide lace to the sleeves and hem to make the jacket longer so it fits me. Then I was able to add 2″ to the center front by removing the old button placket and adding wide pleated trim. The jacket now fits better around the midriff where I need it. It doesn’t button closed, but that’s okay since I never buttoned it up anyway. Here’s how I made all the adjustments.
• 3 yards of 4″ wide lace
• 2 yards rosebud trim (sold in the lace section at the fabric store)
• 1 spool 1/2″ wide edge lace
• 1/2 yard vintage lace for yoke (I used an old skirt)
• the legs from 1 pair old pair of denim jeans, cut into 2 1/2″ strips
• matching thread, scissors, sewing machine
1. Lay your jacket on a table and pin seams together along the front and back yoke, neck and sleeve. Trace the front yoke shape onto a piece of craft paper. Add seam allowance and cut out. Repeat for the back yoke (this should be on the fold)
2. Place the pattern pieces on top of your vintage lace. I used the bottom hem of an old skirt that had a beige lining. Line up the bottom of the yoke of the pattern with the hem of the skirt or other finished edge of lace. Trace around the seams, adding 1/2″ seam allowance for the shoulder seam. Be sure pieces line up from the front to back shoulder. Cut out the front pattern piece. Repeat for the back yoke, using your first pattern piece as a guide to match the neck and seam edges. Cut the pattern out of your vintage lace.
I kept the existing skirt lining intact with my lace since I liked the light color behind the lace. You could also just let the denim show through the lace if you don’t have a lining.
3. Stitch the front and back shoulders of the lace yoke together. Add 1/2″ narrow lace trim to finish armhole edge using a 2.5 zig-zag stitch setting. Fold under lace trim ends and secure.
4. Place the lace yoke on top of the right side of denim yoke. Pin in place. Zig-zag stitch in place with a narrow stitch (2.5) along neck edge, center front, bottom of yoke and armhole. Repeat for back yoke.
Updating the Center Front
1. Cut off front button placket from both sides of the jacket, leaving collar intact. Reserve extra pieces for another project.
2. Make pleated trim for jacket front. Cut off the legs from an old pair of jeans. Cut 6 strips of denim 2 1/2″ wide.
3. Pleat the denim strips by making 1″ folds in the denim with a salad fork as you sew. It’s a bit awkward at first, but you will soon see how easy it is to make even pleats. I love this method and will definitely use it again soon! Don’t worry about the raw edges, the fraying of the denim is part of this vintage charm!
4. Attach the pleated trim down the jacket front from collar to hem with a single needle stitch 3.0 setting. Overlap the pleated trim and center front edge by 1/2″ , pin in place. Top stitch 1″ away from first line of stitching on the right side. Be sure to catch any loose pockets in the seam, my jacket had pockets that were sewn into the original placket and I needed to anchor them in place to keep them from flopping about.
5. Cut a row of lace flowerettes and apply them down the center front on top of the pleated trim. Zig-zag stitch in place. You can use a different lace trim about 1″ wide instead if your lace is an allover pattern and doesn’t have rows.
6. Cut one row of flowers from the flower trim, zig zag stitch on either side of the trim along the center front, on top of the lace and pleats. I preferred my trim slightly off center, covering half of the lace for a unique effect.
Updating the Jacket Cuffs and Hem
1. Gather the 4″ lace 1/2″ from top edge.
2. Fit lace to cuff edge, trim. Pin in place. Sew a zig-zag (3.0) stitch along edge on the wrong side of the cuff.
3. Add a flowered trim to cuff. Cut the floral trim to the same width and length as the cuff. Pin in place on right side of jacket. I cut the trim 1″ short to leave the button and button hole on the sleeve intact so it was still use-able.
4. Zig-zag stitch flower trim in place on top and bottom of cuff.
That’s it! This hack only cost me about $15.00. I already had the jacket and the lace skirt, so it was just a matter of purchasing the trims. We have lots of old jeans around the house and you can’t even tell that the pleated trim on the front of the jacket doesn’t match the rest of the jacket. It’s fun to mix up your old clothes and make them feel new again! Be sure to share pics in the Chambray Blues Sewing Group on Facebook if you remix your old jacket, we would love to see it!
Like this post? Try some of these other posts:
Don’t forget to Pin this post for later!