Tag: blouses

Men’s Thrifted Shirt Upcycle Hack in 7 Steps

Men’s Thrifted Shirt Upcycle Hack in 7 Steps

I adore the patchwork look of upscale designer clothing. This sewing hack uses a couple of thrift-ed men’s dress shirts and some fabric scraps to bring new feminine style!

Men’s Dress Shirt Up-cycle

Up-cycle hacks are all over the internet, and some of my favorites use men’s dress shirts. They are inexpensive, plentiful, and come in lots of great fabrics. I have been keeping this one on hand for a project for some time, I loved the orange and blue plaid colors but it was just too unfeminine for me to wear without feeling awkward. It also didn’t fit very well around the middle, which is no surprise as this is my biggest fit problem!

Men's Thrifted Shirt Restyle|Chambray Blues|www.chambrayblues.com
Photo from Soft Surroundings website

My inspiration came from this shirt from Soft Surroundings. My former workplace, I always loved seeing how their designers put fabrics together in new ways. The feminine look of the back of this shirt was what I loved about it.

Upcycled Men's Dress Shirt|chambraybluesblog|chambrayblues.com

You can easily make a men’s shirt into a feminine statement piece with these 7 steps. Here’s what you will need:

Supplies:

• 2 men’s cotton dress shirts with similar colors, works best of they are the same size (1 plaid, 1 stripe)

•1/2 yard of contrasting floral fabric

•Scissors

•ruler and fabric marker

•Sewing machine and matching thread

Restyled Mens shirt back|Chambraybluesblog|www.chambrayblues.com

 

Upcycled Men's Dress Shirt|chambraybluesblog|chambrayblues.com

 

Upcycled Men's Dress Shirt|chambraybluesblog|chambrayblues.com

 

Directions:

  1. Remove the shirt back by cutting 1/2″ away from the armhole, yoke and side seams. Leave seams intact.

 

2. Use the piece you just removed as a pattern for cutting the contrasting floral fabric, adding 1/2″ to the top and side seams. Cut floral hem slightly shorter than the original piece, at your natural waist.

3. Cut the second shirt, under the armholes, across the front button placket and remove the back.

4. Pin top edges of floral fabric to the seam allowance just under the yoke. Stitch in place making a 1/2″ seam.

5. Sew sides of floral fabric to the back armhole, underarm and side of shirt. Break stitches at top corner as you sew, clip fabric as needed to get a square seam at shoulder.

6. Sew top of stripe fabric to the floral fabric, putting the button down placket at center back as pictured above. Sew side seams and press.

7. Finish side seams of shirt tails with 1/4″ rolled hem.

Mens Shirt Restyle|Chambray Blues Blog|chambrayblues.com
Pin it!

 

Don’t forget to Pin this post!

How to Make a Recycled Denim Ruffled Purse with Cricut and Simplicity

Make an Upcycled Denim Hat from Old Jeans

Easy to Make Scrappy Denim Skirt

Scrappy Denim Boho Necklace Tutorial

How to Sew a Sunny Raincoat

Please follow and like us:
3 Step Easy T-Shirt Pattern Hack

3 Step Easy T-Shirt Pattern Hack

There are many ways to make a simple t-shirt into an updated style. This easy 3 step pattern hack will add style to any wardrobe!

3stepeasyt-shirt|Chambraybluesblog|chambrayblues.com

 

 

I started this pattern hack by finding some adorable pink polkadot fabric from Walmart. It’s a woven fabric, and I loved the pretty colors. I decided it would be a perfect addition to my t-shirt pattern. My main fabric is a soft white jersey knit also from Walmart.

The pattern I used here is McCalls #7331. It’s just a basic t-shirt pattern, but I made 3 simple changes to it with the help of my Cricut Maker. First, cut out the t-shirt pattern in your size from your desired fabric (or you can use a couple of store bought t-shirts, directions for that are below.)

Add style to your t-shirt with this easy pattern hack!

 

3 Step Easy Pattern Hack:

1. Login to Cricut Design Space here.

2. Download my free 3 Step Easy T-Shirt Hack pattern file here.

3. Cut out the pieces with your Cricut Maker.

It’s really easy to sew and fast to assemble by cutting the pieces with your Cricut! This post is sponsored by Cricut. Any opinions given are completely my own.

Bell Sleeve detail|Chambraybluesblog|www.chambrayblues.com

 

Assembly Instructions:

1. Fold sleeve bands in half, right sides out. Stitch together with 5/8″ seam allowance on the long edge.

2. Cut your sleeve piece in half just above the elbow. Sew the contrasting rectangle piece underneath the raw edge of the sleeve with a narrow zig zag stitch 1.5 wide, overlapping the pieces by 1/2 inch.

THE RAW EDGE OF THE KNIT T-SHIRT IS SUPPOSED TO SHOW as in the photo above.

3. Gather the bottom part of the sleeve by stitching along the top edge with 5.0 basting stitch (I added 3″ in the sleeve width to my existing pattern to make the gathered ruffle). Pull up threads and gather the piece to fit the sleeve band (check the fit on your arm before you finish sewing). Overlap the gathered knit sleeve on top of the contrasting fabric by about 1/2″ (right sides up). Stitch in place with narrow zig zag stitch 1.5 wide. THE GATHERED RAW EDGE IS SUPPOSED TO SHOW as in photo.

4. Add lace trim to the bottom of the sleeve hem by stitching lace on with 1/4″ seam allowance using a narrow zig zag stitch.

5. Place the neck facing right side up on the front of the t-shirt neckline with the two pieces touching at center front. Pin in place. Stitch along the outside edge with a narrow zig zag stitch. Tack the facing with the zig zag stitch at center front 1″ from bottom to secure as in photo below.

 

6. Slash center front along the facing at center front to the bottom edge of the facing. Sew lace edging over raw edge with zig zag stitch, folding lace to miter at corners. Sew shoulder seams together. Add lace all around the neck edge, front and back with the same method, folding under ends at center front and tacking in place.

7. Add lace trim to outside of neck facing, stitching again over your first stitching with the same narrow zig zag stitch.

8. Finish shirt by stitching sleeves into armholes, and sewing underarm seam. Hem, press and enjoy! Share with your friends!

 

If you do not want to make an entire t-shirt, you can create this look with two old t-shirts:

1. Cut out contrasting pieces with your Cricut Maker as above.

2. Remove neck ribbing on old t-shirt.

3. Cut 7″ wide strip of fabric off the bottom of one of the t-shirts.

4. Gather fabric along top edge, as in step 3 above. Attach contrasting sleeve trim to existing sleeve edge and lace as described above.

5. Add contrasting fabric at neck as described in step 5 above.

 

Thanks to Cricut for sponsoring this post! If you want more pattern ideas, try these other posts:

How to Restyle a Boring Denim Jacket

How to Read a Sewing Pattern Envelope

How to Shorten Pattern Sleeves

How to Measure for Pattern Alterations

What You Should Know About the Cricut Maker

This is a sponsored conversation written by me on behalf of Cricut. The opinions and text are all mine.

Please follow and like us: