Tag: upcycled

Men’s Thrifted Shirt Upcycle Hack in 7 Steps

Men’s Thrifted Shirt Upcycle Hack in 7 Steps

I adore the patchwork look of upscale designer clothing. This sewing hack uses a couple of thrift-ed men’s dress shirts and some fabric scraps to bring new feminine style!

Men’s Dress Shirt Up-cycle

Up-cycle hacks are all over the internet, and some of my favorites use men’s dress shirts. They are inexpensive, plentiful, and come in lots of great fabrics. I have been keeping this one on hand for a project for some time, I loved the orange and blue plaid colors but it was just too unfeminine for me to wear without feeling awkward. It also didn’t fit very well around the middle, which is no surprise as this is my biggest fit problem!

Men's Thrifted Shirt Restyle|Chambray Blues|www.chambrayblues.com
Photo from Soft Surroundings website

My inspiration came from this shirt from Soft Surroundings. My former workplace, I always loved seeing how their designers put fabrics together in new ways. The feminine look of the back of this shirt was what I loved about it.

Upcycled Men's Dress Shirt|chambraybluesblog|chambrayblues.com

You can easily make a men’s shirt into a feminine statement piece with these 7 steps. Here’s what you will need:

Supplies:

• 2 men’s cotton dress shirts with similar colors, works best of they are the same size (1 plaid, 1 stripe)

•1/2 yard of contrasting floral fabric

•Scissors

•ruler and fabric marker

•Sewing machine and matching thread

Restyled Mens shirt back|Chambraybluesblog|www.chambrayblues.com

 

Upcycled Men's Dress Shirt|chambraybluesblog|chambrayblues.com

 

Upcycled Men's Dress Shirt|chambraybluesblog|chambrayblues.com

 

Directions:

  1. Remove the shirt back by cutting 1/2″ away from the armhole, yoke and side seams. Leave seams intact.

 

2. Use the piece you just removed as a pattern for cutting the contrasting floral fabric, adding 1/2″ to the top and side seams. Cut floral hem slightly shorter than the original piece, at your natural waist.

3. Cut the second shirt, under the armholes, across the front button placket and remove the back.

4. Pin top edges of floral fabric to the seam allowance just under the yoke. Stitch in place making a 1/2″ seam.

5. Sew sides of floral fabric to the back armhole, underarm and side of shirt. Break stitches at top corner as you sew, clip fabric as needed to get a square seam at shoulder.

6. Sew top of stripe fabric to the floral fabric, putting the button down placket at center back as pictured above. Sew side seams and press.

7. Finish side seams of shirt tails with 1/4″ rolled hem.

Mens Shirt Restyle|Chambray Blues Blog|chambrayblues.com
Pin it!

 

Don’t forget to Pin this post!

How to Make a Recycled Denim Ruffled Purse with Cricut and Simplicity

Make an Upcycled Denim Hat from Old Jeans

Easy to Make Scrappy Denim Skirt

Scrappy Denim Boho Necklace Tutorial

How to Sew a Sunny Raincoat

Please follow and like us:
Easy to Make Scrappy Denim Skirt

Easy to Make Scrappy Denim Skirt

This simple skirt is made completely from scraps of thrifted cotton and an pair of old denim jeans. Here’s how you can save your scraps from the trash bin and create something fun and new to wear!

Easy to Make Scrappy Denim Skirt|Chambraybluesblog|Chambrayblues.com

Hi! I’m Jessica and I blog at Designers Sweet Spot.com. I also stitch up all sorts of fun things on my sewing blog Chambray Blues.com. I am so pleased to share this project with you all! Thanks to Deborah for having me guest post on her amazing blog!

Easy to Make Scrappy Denim Skirt|Chambraybluesblog|chambrayblues.com

Why Recycle Fabrics?

I used to give away all my clothes that didn’t fit to the thrift store. That is, until I discovered that thrift stores only keep and sell 20% of the donations they receive, the rest are bundled and sold off to foreign countries or disposed of. Isn’t that sad? All that good stuff goes to waste! I now look for ways to reuse every bit of household fabric that I can especially if it is colorful and in good condition. This is especially true for denim items, Every old pair of jeans can find a new life in someway, this type of fabric iss so versatile and wears for such a long time.

There have been dozens of popular recycled jean skirt projects across the web, this one is an easy version and quick to make with a few basic sewing tools. My fabrics came from the thrift store (other than the jeans that I already owned), which is an added bonus. The local thrift store here sells their fabric scraps for $.50 a bundle. You can’t possibly get any cheaper and I often find great quality fabric there that I couldn’t afford to buy new if it was in a fabric store.

Pair this skirt with your favorite t-shirt and sandals for a quick shopping trip, date to the movies or walk on the beach. You can adjust the length by adding or subtracting rows of ruffles, it would also be an adorable maxi skirt with more rows of fabric. This adult (size 20) version falls just above the knee and finishes 23.5″ long. This would also work great for young girls who have out grown their jeans from last year!

Here’s what you will need:

Supplies:

• One pair of old jeans, any size

• 1/2 yards cut of 3 different patterned 45″ wide cotton fabrics (red, yellow, navy)

• Rotary cutter, 6″ wide quilting ruler and cutting mat (or fabric scissors, pencil and a ruler)

• Matching thread

• Sewing machine

•Ruffling Foot attachment (optional)

Directions:

Easy to Make Scrappy Denim Skirt|Chambraybluesblog|chambrayblues.com

  1. Fold jeans in half, matching side seams and crotch seams. Pin seams together, folding pockets out of the way so they won’t get cut in the next step.
  2. Measure 10 1/2″ down from top of waistband at side seam. Mark and cut across horizontally to the center front, remove the legs of the jeans and lower part of crotch as in photo. Set aside. Save pant legs for other projects.
  3. Lay cotton fabrics on cutting mat with fold near the zero cutting edge of the cutting mat (closest to you), and selvedges at the top of the mat (away from you). Using the quilting ruler, cut fabric into rows of 6″ wide strips.
  4. Turn cotton fabrics on the mat horizontally and cut again, into 11″ wide pieces. Cut pieces will measure 6″ x 11″. Cut 15 of each of the three printed fabrics for a total of 45 pieces.
  5. Stitch the short side of the cotton pieces together in rows of 15, using a 2.5 mm single needle stitch altering colors/prints at random. There is no need to cut the threads between each row, you can chain stitch them together for faster sewing. Continue as needed until all 15 pieces are stitched together.
  6. Gather top edges of each ruffle 1/2″ from top edge with a ruffling foot or by hand using two rows of 5.0mm basting stitch 1/8″ apart and pulling up the threads to gather. Sew ends of each row together to make three complete circles of ruffles.
  7. Pin one row of patterned ruffle to denim cut offs to check fit. Adjust gathers and stitch in place. You can add or remove sections of ruffle if it is too large or small to fit it to your jean cut offs. (For girls a row of 7 pieces of patterned fabrics may be enough)
  8. Continue with second and third rows of ruffles in similar fashion, checking the length and fit as you stitch each row on.
  9. Hem finished skirt with 1/4″ narrow rolled hem on bottom edge.
  10. Press seams to finish.

Don’t forget to Pin this post!

If you enjoyed this project try some of these other recycled fabric ideas:

Scrappy Denim Boho Necklace Tutorial

How to Restyle a Boring Denim Jacket

3 Step Easy T-Shirt Pattern Hack

5 Step Easy Headband

Please follow and like us:
Make an Upcycled Denim Hat from Old Jeans

Make an Upcycled Denim Hat from Old Jeans

This cute hat uses recycled denim, cut up your old jeans and make them into something fun and new!

Upcycled Denim Hat|Chambray Blues Blog|chambrayblues.com

 

I have a large pile of old denim jeans for making unique sewing projects. This cute hat is made from a Simplicity pattern for the Cricut Maker. Using denim in the Cricut machine was a bit of a challenge, but it worked out quite well. Thanks to Cricut and Simplicity for sponsoring this post! Curious as to how this works??? Read on!

My Cricut Maker has become my indispensable tool in my sewing room. I have used it for many things, the options are endless.  Simplicity has a number of great patterns for the Cricut machine. You can see the complete list of options here in the Cricut Design Space.  To make the Woman’s Hat, you will need the following supplies:

Upcycled Denim Hat|Chambray Blues Blog|chambrayblues.com

Supplies:

(affiliate links are included for your convenience)

Cricut Maker

Rotary Cutting Blade

Pink Fabric mats

2 pairs of old jeans in different shades of denim (one light and one dark), about 1/3″ yard of each

Thread

Scissors

Sewing Machine

Upcycled Denim Hat|Chambray Blues blog|Chambrayblues.com

Directions:

  1. Purchase the Simplicity Woman’s Hat pattern and print off pdf sewing directions.
  2. Cut the legs off of the jeans. Cut the legs open along seam line, remove extra seam leaving a smooth fabric for the machine to cut. It was helpful to look at how the pattern pieces will be cut on the mat by previewing the pattern before you actually cut. Cut the light colored denim first for the top and sides of the hat. Cut denim fabric to size as per pattern directions. Lay the denim WRONG side up on the fabric mat, press in place with a roller or by hand to smooth out any bubbles.
  3. Insert the mat into the Cricut, be sure to select the HEAVY DENIM FABRIC setting when cutting.
  4. Remove mat and cut pieces. Clean mat with the scraping tool before applying the next fabric, the denim sheds a lot of debris when cut.
  5. Next cut the sides of the hat as directed by the Cricut design space, again use the light colored denim.
  6. Cut the dark denim last, for the hat brim.

Tips for cutting denim:

1. Keep the mat clean so the denim will stick to it. I found that when the mat was dirty it wouldn’t hold the fabric in place. Using a new fabric mat seemed to work the best.

2. Try to position any remaining seams so the are between the pattern pieces as the machine cuts it. The Cricut was able to cut through about 70% of my denim seams, I did have to restart it once or twice because it got stuck on the thick fabric and cut through the rest of the seam by hand with a scissors after the piece was removed from the machine. The Cricut does an amazing job cutting, asking it to cut through such thick, heavy material repeatedly is probably not the best use of the machine. Cricut sponsors me to go where no user has gone before, and I enjoy pushing my machine to the limit of it’s capability. Please, just be aware that if you decide to cut through impossibly heavy seams you could potentially risk having damaging your machine.

3. There were some denim fabrics that cut easier than others. Fiber contents are all different, and behave differently in the Cricut machine. You may have less trouble cutting thinner, stretchy denim than the old fashioned thickly woven denim fabrics. I used the heavier type denim for this project because that’s what I had available.

Upcycled denim hat|Chambray Blues blog|chambrayblues.com

Sewing Directions:

1. Stitch the side seams together from the 1 and 2 the pattern pieces by placing a #2 in the middle and attaching piece #1 on either side. End seam at the circle at top.

2. Repeat for the back side of the hat.

3. Stitch front and back together, ending seams at circles.

4. Sew the sides of the hat together using piece #3, and attaching piece #4 on either side stopping stitching at circles. Repeat for the back side.

5. Pin top of hat to the sides, matching circles and dots. Stitch together to form crown of hat. Press seams open.

6. Assemble brim, sew center back seam together. Repeat for facing (I did not use any interfacing because the denim was plenty sturdy).

7. Sew brim pieces with right sides together. Turn right side out. Press. I added a row of top stitching 1/4″ from top edge for a crisp look.

8. Apply brim to WRONG side of hat, matching notches. Stitch. Turn brim to outside of hat. Press in place.

9. Tack brim in place at center back seam if desired.

Upcycled Denim Hat|Chambray Blues Blog|chambrayblues.com

This hat was a fun project. It is a rather small size finishing about 22 1/2″ around. When I make this pattern again I will cut a few extra pieces to add to the sides and crown to make it larger. The originally Simplicity pattern called for fleece fabric which has a bit more stretch than the denim. To add to the fun hat, I pinned a vintage broach on the brim. Thanks to Cricut and Simplicity for sponsoring this post!

If you are a blogger and are interested in the Cricut affiliate program, click here.

Upcycled Denim Hat|Chambray Blues Blog|Chambray Blues.com

 

Love this project? Try these other ideas:

What You Should Know About the Cricut Maker

5 Step Easy Headband

3 Step Easy T-Shirt Pattern Hack

Scrappy Denim Boho Necklace Tutorial

How to Sew a Sunny Raincoat

 

 

 

 

Please follow and like us: